| Strings |  |
 |
 |
Elrick Bass Guitar Strings are the product of several years spent working closely with the industry's top string designer.
If you would like to "mix and match" your gauges and materials, please specify in the "Additional Notes" section in the checkout process. |
 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hardware | |
   |
|
Dunlop Straplok™ System The Dunlop Straplok System is designed with the artist in mind and are standard equipment on all Elrick Bass Guitars. 360° groove-and-ball design allows the unit to rotate without catching. The strap retainers are easy to install and operate. The case-hardened steel skin guarantees long life. The same strap can be used with several guitars as the strap buttons are universal. Release-tested up to 800 lbs. of pull; it won't come loose! Complete set includes 2 strap attachments and buttons for instrument. Retrofit instruments with standard strap buttons by replacing existing buttons and screws with special Straplok System brand buttons and screws. Dunlop Straplok System Features:
| |||||||||||||||||||||
| Pickups & Electronics | |
 |
|
Bartolini Electronics Upgrade your Cort licensed Elrick model bass guitar with US made Bartolini electronics like those that come in US handmade Elrick Basses! NTMBF 3-band pre-amp Pre-wired for direct replacement into your Cort licensed Elrick bass (and many other basses too!) Can be wired for 9v or 18v operation. Volume (switch*) / Pickup Blend / Treble / Mid (switch**) / Bass
MK1 replacement pickups Dual coil soapbar pickups that offer powerful lows and low-mids with bright treble. MK1 size shells make these a perfect fit for direct replacement in your Cort licensed Elrick bass and many other import basses that feature Bartolini MK1 shaped soapbars MK Shape Dimensions
|
||||||||||||||||||
 |
|
Aguilar OBP-3 Pre-amp The OBP-3 is Aguilar's most flexible onboard preamp design, providing +/-18dB of cut and boost at 40Hz, +/- 16dB of cut and boost at either 400Hz or 800Hz and +/- 16dB of treble cut and boost at 6.5 kHz. The OBP-3 has multiple wiring options, and can be wired with either a mini-toggle or internal dip-switch for midrange frequency selection. Specs
|
||||||||||||||||||||||||
 |
|
Aguilar OBP-2 Pre-amp The OBP-2 was designed to give bassists fat tone while being small enought fit into tight control cavities. Wire this preamp with one 9 volt battery and it will fit into just about any instrument. With +/-18dB of boost and cut at 40Hz and +/- 16dB of treble boost and cut at 6.5 kHz you have can emphasize just the right frequencies to make your bass sound great in any mix. Specs
|
||||||||||||||||||
 |
|
Aguilar OBP-1 Pre-amp The OBP-1's boost-only design gives you the tone-shaping benefits of active electronics without losing the inherent sound of the instrument. The OBP-1's discrete, all-FET circuitry features up to 18dB of boost at 40Hz and 4kHz, creating a sonic environment high in dynamic headroom and low in noise. Specs
|
||||||||||||||||||
| Maintenance | |
 |
|
Dr. Duck's AxWax & String Lube Original fretboard treatment on all Elrick Bass Guitars
|
||||||
 |
|
Briwax Briwax is the preferred wax of Elrick Bass Guitars and is used as the final step in the finishing process of all instruments. BRIWAX is a solvent based blend of carnauba and beeswax, the two finest wood finishing waxes. Most waxes found today contain the solvents turpentine or mineral spirits, Briwax uses toluene, a much hotter solvent, which allows Briwax to emulsify more of the harder durable waxes like carnauba which produce better protection to your finished surfaces. The use of a hotter solvent results in the wax setting quicker, giving a higher luster and faster finish. The solvent in Briwax will break down old wax residue and help to clean and condition the surface of instruments with natural finishes.
|
||||||
 |
|
Dunlop Guitar Fingerboard Conditioning Kit Keep your fingerboard in top shape. Includes 6524 Fingerboard Cleaner and Prep, 6532 Deep Conditioner Oil, Micro Fine fret polishing cloth, 100% cotton polishing cloth, and care instructions.
|
||||||||||
 |
|
Dunlop Turbo Tune™ Guitar & Bass String Winder Dunlop Turbo Tune™ guitar & bass string winder is just the tool you need to make string changing faster and easier. Constructed of durable industrial resin, the Turbo Tune™ winder features a steel shaft that can be detached for use with a power screwdriver for rapid guitar string changes, or simply use with it's included crank arm.
|
||||||||||
